2000 Arctic Cat ATV Factory Service Manual, Page 300Get this manual

2000 Arctic Cat ATV Factory Service Manual, Page 300

3Tighten the two bumper to rack mm cap screws to 2.8 kg-m (20 ft-lb)Fig8-52 3Remove the front rack from the ATVCLEANING AND
all welds for cracking or bending3Inspect threaded areas of all mounting bosses for stripping4Inspect for missing decals
andor reflectorsINSTALLING 1Place the rack into position on the frame and bumperStart the cap screws and finger-tighten only2Install