2000 Arctic Cat ATV Factory Service Manual, Page 301Get this manual

2000 Arctic Cat ATV Factory Service Manual, Page 301

Front Bumper Assembly Fig8-55 KEY 1Lock Washer 2Headlight Assy 3Bulb 4Machine Screw 5Cap Screw 6Cap Screw 7Nut 8Cap Screw
then cut the cable tie (if necessary) securing the main wiring harness to the front bumper2Remove the torx-head screws securing
the belly panel to the bumperAccount for two concave washersFig8-56 1Clean all bumper components with parts-cleaning solvent2Inspect
all welds for cracking or bending3Inspect threaded areas of all mounting bosses for stripping4Inspect the wiring harness
and headlights for damage5Inspect the screen for damage or air-flow obstructionsINSTALLING 1Place the bumper assembly into