2000 Arctic Cat ATV Factory Service Manual, Page 311Get this manual

2000 Arctic Cat ATV Factory Service Manual, Page 311

1Install the O-ring, reservoir, gasket, and cover on the master cylinderSecure with two screws tightened to 1.1 kg-m (8 ft-lb)2Install
250300 cc ! WARNING A new lock nut must be used to secure the brake leverINSTALLING 1Position the brake assembly on the handlebarSecure
with clamp screws; then tighten securelyFig9-5 KEY 1Mechanical Brake Assy 2Inner Arm 3Arm Pin 4Pad 5Outer Arm 6Arm Spring
7Housing 8Cable 9Cap Screw 10111213141516 Spring Washer Snap Ring Bracket Cap Screw O-Ring Foot Brake Pedal 0733-691 400500
cc 2Install the brake hose on the master cylinderTighten securelyFig9-6 KEY 1Mechanical Brake Assy 2Inner Arm 3Arm Pin 4Pad