2000 Arctic Cat ATV Factory Service Manual, Page 312Get this manual

2000 Arctic Cat ATV Factory Service Manual, Page 312

ATV0088D Throttle Control KEY 1Throttle Case Assy 2Lever 3Cap Screw 4Lock Washer 5Washer 6Cap Screw 7Nut 8Cap Screw 9Cap
1Remove the two machine screws securing the throttle control to the handlebarFig9-11 INSTALLING 2Slide the grommet out of
the lower half of the throttle control; then remove the cable from the actuator arm9-4 1Place the return spring into the
throttle control; then place the bushing and actuator arm into positionSecure with the cap screw, lock washer, and washer.