2000 Arctic Cat ATV Factory Service Manual, Page 334Get this manual

2000 Arctic Cat ATV Factory Service Manual, Page 334

Problem: Suspension too soft Condition 1Spring(s) weak 2Shock absorber damaged Problem: Suspension too stiff Condition 1A-arm-related
screws Tighten nut Adjust brake Replace bushing Replace shock absorber Tighten nut Problem: Braking poor Condition 1Pad worn
2Pedal free-play excessive 3Brake fluid leaking 4Hydraulic system leaking air 5Master cylinderbrake cylinder seal worn Problem:
Brake lever travel excessive Condition 1Hydraulic system entrapped air 2Brake fluid low 3Brake fluid incorrect 4Piston seal
cup worn Problem: Brake fluid leaking Condition 1Connection joints loose 2Hose cracked 3Piston seal worn Remedy 1Replace
pads 2Adjust free-play 3Repair replace hydraulic system 4Bleed hydraulic system 5Replace seal(s) Remedy 1Bleed hydraulic