2001 Arctic Cat ATVs factory service and repair manual, Page 40Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 40

TIRE INFLATION PRESSURE On all models, front and rear tire inflation pressure should be 0.35 kg-cm2 (5.0 psi)A low-pressure
worn, cracked, or damagedGCotter pins damaged or missing 6Install the cover making sure the O-ring is properly positioned;
then secure with the screws TIRE SIZES DriveshaftCoupling The following drive system components should be inspected periodically
to ensure proper operationASpline lateral movement (slop)BRubber coupling cracked, damaged, or worn The ATV is equipped with
low-pressure tubeless tires of the size and type listedDo not under any circumstances substitute tires of different type
or size250 cc Size 300 cc Size (4x4) Size (2x4) 400 cc Size 500 cc Size Front AT23 8-12 Front AT24 9-12 AT23 8-12 Front AT25
8-12 Front AT25 10-12 Rear AT24 9-12 Rear AT25 10-12 AT25 10-12 Rear AT25 10-12 Rear AT25 10-12 SuspensionShock AbsorbersBushings
The following suspension system components should be inspected periodically to ensure proper operationAShock absorber rods
bent, pitted, or damagedBRubber damper cracked, broken, or missingCShock absorber body damaged, punctured, or leakingDShock