2001 Arctic Cat ATVs factory service and repair manual, Page 47Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 47

2Measure the thickness of each brake padFig2-95 AF615D AF739DB EInstall the wheelTighten to 6.9 kg-m (50 ft-lb) 3If thickness
the pads and remove the padsFig2-96 Mechanical Foot Brake (Manual Transmission) CHECKING Although the rear brake has been
adjusted at the factory, the brake should be checked for proper operationThe mechanical brake must be maintained to be fully
functional1With the engine off, transmission in neutral,and the reverse lever in the forward position, press the foot brake
pedal and attempt to move the ATVFig2-98 CInstall the new brake pads; then secure with the pin and cotter pinSpread the cotter