2001 Arctic Cat ATVs factory service and repair manual, Page 53Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 53

4Rotate the V-belt and clutches until the V-belt is flush with the top of the driven clutchNOTE: Before proceeding, make
5Place the V-belt cover gasket into position; then install the cover and secure with the cap screws making sure the different-lengthed
cap screws are in their proper locationTighten the cap screws to 1.1 kg-m (8 ft-lb)Fig2-120 8Place the cooling shroud into
position on the V-belt cover; then secure with cap screwsTighten to 1.1 kg-m (8 ft-lb)9Tighten the clamp securing the cooling