2001 Arctic Cat ATVs factory service and repair manual, Page 62Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 62

17Remove the clips securing the shifter cables to the bracketFig3-16 14Remove the cap screws securing the CDI unitFig3-14
the battery ground (negative) cable from the crankcase coverFig3-18 16Route the carburetor assembly up and away from the
engineNOTE: It will not be necessary to disconnect the choke cableAlso, use cable ties or tape to secure the carburetor assembly
to keep it from interfering with the removal procedure 20Disconnect the high tension lead from the spark plug21Disconnect