2001 Arctic Cat ATVs factory service and repair manual, Page 66Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 66

2Remove the cap screws securing the valve cover to the head; account for the locations of any rubber washers on top side
4Remove the cap screw securing the chain tensioner pad (account for washer)Fig3-38 5Bend the washer tabs and remove the two
cap screws securing the sprocket to the camshaft; then drop the sprocket off the camshaftWhile holding the chain, slide the
sprocket and camshaft out of the cylinder headAccount for an alignment pinFig3-39 3Loosen the cap screw on the end of the