2001 Arctic Cat ATVs factory service and repair manual, Page 76Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 76

Removing Right-Side Components ACover BRelease Roller Guide CPrimary Driven Gear DPrimary Driven Clutch EStarter Clutch Housing
the clutch release arm and gear shift shaft out of the crankcase; then in crisscross pattern, remove the four cap screws
securing the clutch release roller assemblyFig3-87 3Remove the release roller assemblyAccount for four springsCC423D 4Remove
the starter clutch-shoe nut (left-hand threads) and washer from the driveshaft; then using clutch shoe remover, remove the
clutch shoe NOTE: It will be necessary to remove the lower rear oil filter cover stud and the upper arm cap screws to provide