2001 Arctic Cat ATVs factory service and repair manual, Page 88Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 88

Fig3-152 2Using plastic mallet, lightly tap the case halves together until cap screws can be installed3From the left side,
Fig3-156 Joining Crankcase Halves 1Verify that the alignment pins are in place and that both case halves are clean and grease
freeApply Three Bond Sealant (pn 0636-070) to the mating surfacesPlace the right-side half onto the left-side halfFig3-154
4From the right side, install the cap screws noting the location of the cap screw with the copper washer; then tighten only