2001 Arctic Cat ATVs factory service and repair manual, Page 89Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 89

Fig3-157 Installing Right-Side Components AOil StrainerOil Pump BGear Shift Shaft 1Place the oil strainer into position beneath
Rotate the shafts back and forth to ensure no binding or sticking occurs 2Noting the arrow from disassembly, place the strainer
cap into position on the crankcase making sure the O-ring is properly installed and secure with the cap screws; then tighten
the oil drain plug to 2.2 kg-m (16 ft-lb)Fig3-160 + AT THIS POINT After completing center crankcase components, proceed to
Installing Right-Side Components, to Installing Left-Side Components, and to Installing Top-Side Components 3Place the oil