2001 Arctic Cat ATVs factory service and repair manual, Page 93Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 93

Fig3-175 Fig3-177 NOTE: If alignment marks were not scribed during removing, it may be necessary to reposition the clutch
clutch housing onto the crankshaftCC448D ! CAUTION The clutch hub and the clutch pressure disc must be seated in the proper
positionIf any of the incorrect positions are used, the hub and disc will have clearance between them and they will not operate
properly 17Install the clutch shoe and washer; then secure with the starter clutch-shoe nut (left-hand threads) coated with
red Loctite #271Tighten to 11 kg-m (79.5 ft-lb)Fig3-179 14Place the primary driven clutch assembly onto the countershaftNOTE: