2001 Arctic Cat ATVs factory service and repair manual, Page 98Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 98

Fig3-203 Fig3-206 15Place the magneto rotor into position on the crankshaft making sure the key is in placeFig3-204 CStator
17Install the rotor nut on the crankshaft and tighten until the rotor is properly seated; then tighten to 16 kg-m (116 ft-lb)Fig3-207
16Install the starter idler gear and shaft; then install the spacerFig3-205 18Place the gasket and left-side cover into position