2001 Arctic Cat ATVs factory service and repair manual, Page 102Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 102

Fig3-221 Fig3-224 6On the 300 cc only, install the O-ring onto the front left-side studFig3-222 9Loosely install the remaining
10In crisscross pattern, tighten the three cylinder head cap nuts and one nut to 2.5 kg-m (18 ft-lb)Tighten the remaining
head nuts and the cylinder-to-crankcase nuts to 1.1 kg-m (8 ft-lb)11Place the C-ring into position in its groove in the cylinder
headFig3-226 8Install the three cylinder head cap nuts and one nut with copper washers (note the locations of the cap nuts