2001 Arctic Cat ATVs factory service and repair manual, Page 106Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 106

Fig3-241 Fig3-243 DAlign the valve adjuster handle with one of the marks on the valve adjuster dialEWhile holding the valve
whenever servicing the ATV Installing EngineTransmission 1Install the engine into the sub-frame assemblyFWhile holding the
adjuster dial at the proper clearance setting, tighten the jam nut securely with the valve adjuster handle 2Connect each
drive axle to the engine output shafts3Secure the upper A-arms with cap screwsTighten to 4.8 kg-m (35 ft-lb)Fig3-244 30Place
the two tappet covers with O-rings into position; then tighten the covers securelyFig3-242 CH077D CC366D 31Install the spark