2001 Arctic Cat ATVs factory service and repair manual, Page 112Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 112

3Drain the oil from beneath the enginetransmission; then drain the cooling systemFig3-270 Fig3-272 ATV-0109 4Drain the gas
9Mark the reverse gear shaft arm to the reverse shift shaft to aid in assembly and remove the cap screw securing the reverse
gear shaft arm to the reverse shift shaft; then route the cable and arm away from the enginetransmissionFig3-273 NOTE: Use
cable tie or tape to keep the cable from interfering with the removal procedure 10Detach the speedometer cable by loosening