2001 Arctic Cat ATVs factory service and repair manual, Page 113Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 113

11Remove the four cap screws securing the rear output joint to the transmission and push the shaft away from the transmissionFig3-275
procedureALoosen the clamps securing the carburetor boot and the air inlet bootFig3-276 Fig3-279 NOTE: It will not be necessary
to disconnect the choke cable BRoute the carburetor assembly up and away from the engineNOTE: Use cable ties or tape to secure
the carburetor assembly above the handlebars to keep it from interfering with the removal procedure 13Remove the clamp securing