2001 Arctic Cat ATVs factory service and repair manual, Page 142Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 142

Fig3-431 Installing Right-Side Components AOil StrainerOil Pump BGear Shift Shaft 1Place the oil strainer with new O-ring
cap into position on the strainer making sure the O-ring is properly installed and secure with the cap screws; then install
and tighten the oil drain plug to 2.2 kg-m (16 ft-lb)Fig3-430 5Place the gear shift cam plate and guide onto the gear shift
cam making sure the alignment pin was installedSecure assembly with the cap screw coated with blue Loctite #242Tighten securelyFig3-433