2001 Arctic Cat ATVs factory service and repair manual, Page 145Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 145

14Install the clutch sleeve hub making sure the marks scribed in removing are alignedThe alignment dots must also be aligned
housing on their respective shafts making sure the sleeve is properly positioned in the primary assemblyFig3-449 Fig3-447
NOTE: Note the alignment mark scribed on the primary driven gear assembly during disassembly 16Using the Clutch Sleeve Hub
Holder (pn 0444-007), install the nut coated with red Loctite #271 and washerTighten to 10 kg-m (72 ft-lb)CC364A Fig3-450
NOTE: If alignment marks were not scribed during removing, it may be necessary to reposition the clutch sleeve hub and the