2001 Arctic Cat ATVs factory service and repair manual, Page 146Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 146

Fig3-451 20Install the clutch release arm and release roller guide making sure the release roller and guide are alignedFig3-454
cap screw coated with blue Loctite #242Tighten securelyFig3-455 19Install the release roller assembly making sure the four
springs are in position; then using crisscross pattern, tighten the four cap screws securelyNOTE: Tighten the four roller
assembly cap screws in crisscross pattern making sure there is no clearance between the clutch plates when securedFig3-453