2001 Arctic Cat ATVs factory service and repair manual, Page 155Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 155

Fig3-501 CStator AssemblyCover DSpeedometer Drive EHiLow Shifter Assembly FRecoil Starter NOTE: Steps 1-20 in the preceding
seatedTighten to 16 kg-m (116 ft-lb)Fig3-502 22Install the fourteen cap screws to secure the left-side coverNote the location
of the long cap screw with rubber gasketFig3-504 Fig3-505 20Install the two alignment pins into the left crankcase halfNOTE:
Make sure that five washers, one bushing, and two alignment pins are in placeFig3-503 23In crisscross pattern, tighten the
cap screws to 0.9-1.3 kg-m (6.5-9.5 ft-lb)24Place the shift stop housing assembly into position beneath the shift shaft housing