2001 Arctic Cat ATVs factory service and repair manual, Page 162Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 162

Fig3-534 20Remove the cap screw from the end of the chain tensioner; then using flat-blade screwdriver, rotate the adjuster
NOTE: The adjuster shaft will be drawn into the tensioner as the adjuster screw is rotated clockwiseThe adjuster shaft tension
will be released in step 22 21Place the chain tensioner adjuster assembly and gasket into position on the cylinder and secure
with the two Allen-head cap screwsFig3-538 19Place the chain tensioner into position and secure with the cap screw and washerFig3-536