2001 Arctic Cat ATVs factory service and repair manual, Page 168Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 168

3Drain the engine oil; then drain the cooling systemFig3-561 8Remove the hardware securing the rear rackfender assembly to
the torx-head screw securing the shift lever handleRemove the handleFig3-562 Fig3-565 5Remove the hardware securing the right-side
and left-side panels; then remove the panels6Turn the gas tank valve to the OFF position; then remove the fuel hoseFig3-563
11Remove the clamps securing the air intake hose to the carburetor; then remove the air cleaner housing12Remove the hardware
securing the cooling duct assembly to the frame; then remove the cooling duct shroud from the V-belt cover 7Remove the two