2001 Arctic Cat ATVs factory service and repair manual, Page 170Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 170

Fig3-572 Fig3-574 18Remove the torx-head screws securing the exhaust pipe shroud; then remove the shroudFig3-573 22Remove
the exhaust pipe and engineNOTE: Loosening the torx-head screws securing the battery box will allow for easier removal of
the exhaust pipe Fig3-576 20Remove the hardware securing the exhaust pipe to the muffler, frame, and engine; then remove
the exhaust pipe21Remove the two coolant hoses from the engineRoute the hoses out of the way NOTE: It is advisable to lock
the brake when loosening the cap screws securing the front driveshaft 23On the right side, cut the cable ties securing the