2001 Arctic Cat ATVs factory service and repair manual, Page 172Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 172

32Remove the shift indicator connector from the main wiring harness33Remove the cap screw securing the engine ground wire
on the lower front boltFig3-584 36Slightly raise the front of the engine; then remove the front driveshaft coupler from the
engineFig3-587 Fig3-585 37Remove the torx-head screws securing the clutch plenum to the engine; then remove the plenum and
account for gasketFig3-588 CC576 CC579 38Remove the engine from the right side by moving the engine forward while raising