2001 Arctic Cat ATVs factory service and repair manual, Page 188Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 188

Fig3-670 Assembling Crankcase Half 1Install the output shaft assembly into the crankcase making sure the two gears, shim,
2Apply red Loctite #271 to the threads of the output shaft; then secure with the nutTighten nut to 10 kg-m (72 ft-lb); then
using punch, peen the nutFig3-669 NOTE: If heating the bearing is not possible, the crankshaft can be installed using crankshaft