2001 Arctic Cat ATVs factory service and repair manual, Page 193Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 193

Fig3-694 Fig3-696 NOTE: When installed correctly, the sides of the drive and driven gears will be flush with each other Fig3-697
washer be installed correctly and note that the nut has left-hand threadsCC595 Fig3-695 8Install the clutch cover alignment
pins into the crankcase, apply oil to the cover gasket, and install the gasket onto the crankcase9Apply grease to the outer
edges of the clutch housing; then from inside the clutch cover, install the clutch housing into the cover using rubber mallet10Install