2001 Arctic Cat ATVs factory service and repair manual, Page 194Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 194

! CAUTION When installed correctly, the green alignment dot on the one-way clutch DOES NOT SHOW Fig3-701 11Place the clutch
14Slide the fixed drive face onto the shaft15Spread the faces of the driven clutch by pushing the inner face toward the engine
while turning it counterclockwise; then when the faces are separated, insert wedge (approximately 38 inthick) between the
facesRelease the inner faceFig3-702 Fig3-700 16Place the V-belt into position on the driven clutch and over the front shaftFig3-703
13Place the fixed driven assembly into position and secure with the nutTighten to 10.4-11.8 kg-m (75-85 ft-lb) NOTE: The