2001 Arctic Cat ATVs factory service and repair manual, Page 197Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 197

Fig3-713 Installing Top-Side Components APiston BCylinder Fig3-715 10Install the shift arm on the shift arm shaft making
them in this sequence AInstall thin oil ring, corrugated oil ring, and thin oil ring in the bottom groove of the pistonStagger
the gaps of the upper and lower thin ringsFig3-716 12Place the gasket and recoil starter assembly into position on the left-side
cover; then tighten four cap screws to 0.8 kg-m (6 ft-lb) ATV-1085 NOTE: To be installed correctly, the ends of the corrugated