2001 Arctic Cat ATVs factory service and repair manual, Page 201Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 201

NOTE: At this point, oil the camshaft bearings, cam lobes, and the three seating journals on the cylinder Fig3-732 13With
rotating the camshaft is necessary for alignment, do not allow the chain and sprocket to rotate and be sure the cam lobes
end up in the down positionFig3-731 ! CAUTION If any of the above factors are not as stated, go back to step 11 and carefully
proceed 15Place the tab-washer onto the sprocket making sure it covers the pin in the alignment holeFig3-733 14Seat the cam
sprocket onto the camshaft making sure the alignment pin in the camshaft aligns with the smallest hole in the sprocket; then
place the camshaftsprocket assembly onto the cylinder ensuring the following ATV1027 ! CAUTION Care must be taken that the