2001 Arctic Cat ATVs factory service and repair manual, Page 203Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 203

NOTE: The adjuster shaft will be drawn into the tensioner as the adjuster screw is rotated clockwiseThe adjuster shaft tension
the tab to secure the cap screwCC011D Fig3-741 24Rotate the crankshaft until the first cap screw securing the sprocket to
the camshaft can be addressed; then tighten to 1.5 kg-m (11 ft-lb)Bend the tab to secure the cap screw25Loosen the four adjuster
screw jam nuts; then loosen the four adjuster screws on the rocker arms in the valve coverFig3-744 22Using flat-blade screwdriver,
rotate the adjuster screw inside the tensioner counterclockwise until all tension is released; then install the cap screw