2001 Arctic Cat ATVs factory service and repair manual, Page 205Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 205

Fig3-748 Fig3-750 NOTE: Before proceeding, make sure the foot brake pedal return spring is properly positioned as shownFig3-749
making sure to account for washer on the upper bolt and spacer on the lower front boltTighten only until snug4Align the front
and rear driveshafts and secure with existing hardwareTighten only until snug5Secure the upper engine head mount to the frame
with the existing hardwareTighten to 2.8 kg-m (20 ft-lb)6Secure the upper engine head mount to the engine with the existing
cap screw and flange nutTighten to 2.8 kg-m (20 ft-lb)7Tighten all engine mounting through-bolts to 5.5 kg-m (40 ft-lb);