2001 Arctic Cat ATVs factory service and repair manual, Page 213Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 213

Fig3-784 Grinding Valve Seats NOTE: If the valve seat is beyond servicing, the cylinder head must be replaced 1Insert an
Fig3-785 NOTE: On the 400500 cc, repeat procedure on the remaining exhaust valveCC138D Fig3-787 Valve SeatGuide Servicing
Flow Chart 2Insert an intake valve seat pilot shaft into one of the intake valve guidesSlide the intake valve seat grinding
tool onto the pilot shaft; then using light pressure on driver handle and deep socket, grind the intake valve seat until