2001 Arctic Cat ATVs factory service and repair manual, Page 219Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 219

Fig3-809 Fig3-812 Fig3-810 4If any measurement exceeds the limit, hone the cylinder and install an oversized piston or replace
(600 RPM) at the rate of 30 strokes per minuteIf honing oil is not available, use lightweight petroleum-based oilThoroughly
clean cylinder after honing using soap and hot waterDry with compressed air; then immediately apply oil to the cylinder boreIf
the bore is severely damaged or gouged, replace the cylinderFig3-811 ATV-1068 Measuring Camshaft Runout NOTE: If the crankshaft