2001 Arctic Cat ATVs factory service and repair manual, Page 226Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 226

Fig3-844 SHIFT FORK THICKNESS (250300 cc) #1, #2, and #3 Secondary Transmission #1 and #2 Reverse 4.3-4.4 mm (0.169-0.173
shift fork is out of tolerance, replacement is necessary 1Using calipers, in turn measure the thickness of the machined tip
of each shift forkFig3-846 SHIFT FORK GROOVE WIDTH (250300 cc) #1, #2, and #3 Secondary Transmission #1 and #2 Reverse 4.5-4.6
mm (0.177-0.181 in 5.45-5.55 mm (0.215-0.219 in 4.0-4.1 mm (0.157-0.161 in SHIFT FORK GROOVE WIDTH (400500 cc) #1 and #2
Secondary Transmission 5.5-5.6 mm (0.217-0.220 in 5.4-5.5 mm (0.213-0.217 in 5.0-5.1 mm (0.197-0.201 in 4.9-5.0 mm (0.193-0.197