2001 Arctic Cat ATVs factory service and repair manual, Page 228Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 228

MEASURING CLUTCH DRIVE PLATE (Fiber) THICKNESS Fig3-853 1Using calipers, in turn measure the thickness of each drive plate
are present, replace the hubNOTE: On the 250300 cc, note the location of the timing mark on the hub for assembly purposesFig3-852
1Insert the drive into the clutch housing2Rotate the inner race by hand and verify the inner race rotates only one direction3If
the inner race is locked in place or rotates both directions, the drive assembly must be replacedMEASURING CLUTCH SPRING
LENGTH 1Using calipers, measure the overall free length of the clutch springFig3-854 INSPECTING STARTER CLUTCH SHOE 1Inspect
the starter clutch shoe for uneven wear, chips, cracks, or burns2Inspect the groove on the shoe for wear or damage3If any