2001 Arctic Cat ATVs factory service and repair manual, Page 259Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 259

2Remove the shift handle cap; then remove the torx-head screw securing the handle and remove the handleFig4-59 6Loosen the
nut securing the belt cooling duct to the frameLoosen the clamp securing the duct to the cooling shroud; then remove the
belt cooling ductFig4-60 7By unscrewing the plastic choke cable end, disconnect the choke cable from the carburetorFig4-58
8Disconnect the gas and vent hoses; then remove the carburetorREMOVING (500 cc) 1Turn the gas tank valve to the OFF position