2001 Arctic Cat ATVs factory service and repair manual, Page 275Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 275

Fig4-118 500 cc (Automatic Transmission) KEY 1Radiator Screen 2Wire Clamp 3Cap Screw 4Grommet 5Collar 6Vent Hose 7Radiator
Antifreeze (pn 0638-395)While the cooling system is being filled, air pockets may develop; therefore, run the engine for
five minutes after the initial fill, shut the engine off, and then fill the cooling system to 12 inabove the radiator coreFig4-119
Fig4-120 Radiator 0732-411 REMOVING 1Drain the coolant at the engine ! CAUTION After operating the ATV for the initial 5-10
minutes, stop the engine, allow the engine to cool down, and check the coolant levelAdd coolant as necessary 2Remove the
front rack (see Section 8)3Remove the front fenders (see Section 8)4Remove the four machine screws securing the fender panels