2001 Arctic Cat ATVs factory service and repair manual, Page 329Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 329

8Install the magnetic drain plug with the gasketTighten securelyFig6-76 6Measure gear casehub clearance using the following
mm (0.016-0.024 inN OTIf hin specification, the gear case and hub must be shimmed (see Shim Chart) 9Install the oil level
inspection plug with the O-ringTighten securelyFig6-77 7Apply green Loctite #270 to the Allen-head screws; then secure the