2001 Arctic Cat ATVs factory service and repair manual, Page 334Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 334

Fig6-103 39The maximum preload must be within range of 5-9 kg-cm (4.3-7.8 inlb)If the preload is beyond the specified range,
grease to the O-ring; then install the drive bevel gear assembly into the differential housing37Secure the drive bevel gear
assembly with the cap screws coated with green Loctite #270Tighten securelyFig6-104 41Place any small shim(s) removed onto
the differential housing cover driven output shaft; then place any large shim(s) removed onto the differential case assemblyInstall
the differential case assembly into the differential housingFig6-107 38Rotate the drive bevel gear flange clockwise and counterclockwise