2001 Arctic Cat ATVs factory service and repair manual, Page 342Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 342

Fig6-145 NOTE: The large grease pack is for the inner drive axle bearing and boot assemblyFig6-148 Fig6-146 ATV-1052 4Install
must go onto the shaft with the side without splines facing toward the small clamp of the inner boot or severe damage will
result NOTE: The boot is positioned correctly when the small end of the boot seats down into the recessed groove 2Secure
the small clamp of the inner bootFig6-147 5Secure the bearing ring with the circlip making sure the sharp side of the circlip