2001 Arctic Cat ATVs factory service and repair manual, Page 348Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 348

NOTE: Check all fasteners for tightness and check the brakes for proper operation before test riding Fig6-177 REMOVING 1Secure
the wheel cap from the hub; then remove the cotter pin from the nutNOTE: During assembly, new cotter pins should be installedFig6-175
1Clean all hub components2Inspect all threads for stripping or damage3Inspect the brake disc for cracks or warping4Inspect
the sealing area of the hub for pits5Inspect the hub splines for signs of wear6Inspect the hub for cracksINSTALLING 3Remove
the nut securing the hubAccount for washer and hub sealFig6-176 1Secure the brake disc to the hub with the four cap screws