2001 Arctic Cat ATVs factory service and repair manual, Page 361Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 361

3Route the brake hose through the upper A-arm shock absorber mountFig7-20 7Install the tie rod end and secure with the nutTighten
(35 ft-lb)5Secure the A-arm assemblies to the frame mountsTighten the cap screws to 4.8 kg-m (35 ft-lb)AF618D ! CAUTION Do
not tighten the nut beyond the 4.8 kg-m (35 ft-lb) specification or the shock eyelet or mount WILL be damaged 8Apply grease
to hub sealing area and on the splines; then install the hub assembly onto the splines of the shaftFig7-23 6Install the knuckle