2001 Arctic Cat ATVs factory service and repair manual, Page 362Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 362

13Install new cotter pin and spread the pin to secure the nutFig7-26 10Place the washer onto the shaft; then secure the hub
kg-m (20 ft-lb)Fig7-25 14Install the wheel cap15Install the wheel and tighten to 6.9 kg-m (50 ft-lb)Fig7-27 12Secure the
hub nut (threads coated with green Loctite #270) to the shaftaxleTighten to 10.4 kg-m (75 ft-lb) 16Remove the ATV from the