2001 Arctic Cat ATVs factory service and repair manual, Page 364Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 364

TIRE INFLATION PRESSURE On all models, front and rear tire inflation pressure should be 0.35 kgcm2 (5.0 psi) ! WARNING Always
CHECKINGINFLATING CLEANING AND INSPECTING NOTE: Whenever part is worn excessively, cracked, or damaged in any way, replacement
is necessary 1Using an air gauge, measure the air pressure in each tireAdjust the air pressure as necessary to meet the specified
pressure2Inspect the tires for damage, wear, or punctures 1Clean the wheels and hubs with parts-cleaning solvent2Clean the
tires with soap and water3Inspect each wheel for cracks, dents, or bends4Inspect each tire for cuts, wear, missing lugs,
and leaksINSTALLING ! WARNING Do not operate the ATV if tire damage existsNOTE: If repair is needed, follow the instructions