2001 Arctic Cat ATVs factory service and repair manual, Page 368Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 368

REMOVING 1Remove the seat2Turn the gas tank valve to the OFF position; then remove the left-side panel3Disconnect the fuel
post actuator armRemove the tie rod ends from the armFig8-4 9On the 400500 cc models, remove the cap screws securing the
instrument podFig8-7 6Remove the cotter pin and slotted nut securing each opposite side tie rod end to the knucklesRemove
the tie rod ends from the knuckles; then remove the tie rods7Remove the cap screws securing the bearing flange to the support