2001 Arctic Cat ATVs factory service and repair manual, Page 375Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 375

6Install the tie rod end and secure with the nutTighten to 4.2 kg-m (30 ft-lb); then install new cotter pin and spread the
into the hubFig8-34 10Place the washer onto the shaft; then secure the hub assembly with the nutTighten only until snugAF759D
7Apply small amount of grease to the hub sealing area and on the splinesFig8-32 11Secure the brake caliper to the knuckle