2001 Arctic Cat ATVs factory service and repair manual, Page 376Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 376

12Secure the hub nut (threads coated with green Loctite #270) to the shaftaxleTighten to 10.4 kg-m (75 ft-lb)13Install new
catch bracketsFig8-39 16Remove the ATV from the support stand AF788DA MeasuringAdjusting Toe-InToe-Out 1Thoroughly wash the
ATV to remove excess weight (mud, etc2Refer to the specifications and ensure the tires are properly inflated to the recommended
pressureNOTE: Ensure the inflation pressure is correct in the tires or inaccurate measurements can occurFig8-38 5Adjust the
handlebar direction until the two measurements are equal; then secure the handlebar to the rear rack using tie-down strapsNOTE:
Care must be taken not to allow the handlebar to turn while securing itFig8-40 6Measure the distance from the inside of each